Toyo Injection Molding Machine Full Electric ST50 Disc PRO&II

Description

This item shipping from Thailand with tracking #
Data Sheet of Used TOYO ST50 Disc II & PRO
Year: 2002-2004
Clamping force: 50 ton
All Electrical
Shot weight (max): 37.872 g
Distance between tie-bars (H): 290 mm
Distance between tie-bars (V): 260 mm
Platen size (H): 260 mm
Platen size (V): 260 mm
Screw diameter: 28 mm
Mould height (max): 275 mm
Mould height (min): 175 mm
Screw L/D ratio: 22
Screw speed: 500 rpm
Injection pressure: 1750 bar
Injection rate: 161 cm³/s
Included: Robot for unloading, thermostat KAWATA (Japan), power stabilizer, vacuum pump
Injection
Injection stroke: 60 mm
Injection Speed: 303 mm/sec
Motor for injection: 7.5 kw servo
Recovery rate (PC): 14.7 g/s
Motor for screw driving: 5.5 kw servo
Clamping
Clamping system: double toggle, 0.6 sec for mold open/close
Clamping stroke: 120 mm
Motor for compression driving: 7.5 kw servo
Compression
Compression system: Injection compression
Compression force: 490 kN (50 ton)
Compression stroke: 2.0 mm
Compression speed: 90 mm/sec
Motor for compression driving: 7.5 kw
Gate cutting
Gate cut system: Servo motor drive
Gate cut force: 31.3 kN (3.2 ton)
Gate cut stroke: 3.0 mm
Gate cut speed: 66.8 mm/sec
Motor for gate cut driving: 0.75 kw servo
Ejection
Ejection system: servo motor drive
Ejection force: 12.7 kN (1.3 tons)
Ejection stroke: 12 mm
Ejection speed: 167 mm/sec
Motor for ejection driving: 0.75 kw
Releasing of products
Releasing system: Air blow, 2 lines
Releasing air pressure: 0.49 MPa (5 kg/cm2)
Releasing air flow: 10x2=20 Inxmin
Others
Heater capacity: 5.58 kw
Motor for mold height adjusting: 0.2 kw
Motor for nozzle pressing: 0.3 kw servo
Machine dimensions: 3274 x 924.7 x 1779 mm
Machine weight: 3.5 tons